The Rice Lake SCT-10 is DIN-rail mountable within a cabinet or control panel, where it converts a scale’s load cell signals to analog output, serial output, or a specific network protocol. Unlike many other signal transmitters, Rice Lake’s SCT-10 has its own .3 inch weight display, with annunciators for unit and weighing status, and push buttons for zero, tare and setpoint entry.
Features
- Converts digital weight to Ethernet TCP/IP output
- Space saving DIN rail mounting
- 999,999 displayed resolution
- Internal resolution 16 million counts
- System linearity ± 0.01% full scale
- Supports up to 4 input channels in parallel
- Serial port RS-485 or RS-232 simplex supports up to 115,200 bps
- 2 inputs, 2 outputs
- LED display, 0.3 in, six digit, seven segment
- NEMA Type 1 plastic pluggable connectors
- Reads in kg, g, and lb
- Center of zero, motion, net, and units annunciators
- 4 Keys for zero, tare, menu, escape, left and up navigation, enter
- 12-24 VDC power
1 year manufacturer's limited warranty
- Maximum Displayed Resolution:
- 1:999,999
- Internal Resolution:
- 16 million counts
- Weighing Units:
- lb, kg, g
- Display:
- LED
- Keypad Controls:
- 4 tactile switches
- Digital Inputs:
- 2 inputs 5-24 VDC
- Outputs:
- 2 outputs 24 VDC/60mA N.0. or N.C. (solid state)
- NEMA Rating:
- NEMA Type 1 plastic pluggable connectors
- Load Cell Excitation:
- 5 VDC, 120 mA
- Load Cell Drive:
- Up to 8 x 350 ohm
- Analog Load Cell Input Range:
- +/- 19.5 mV
- Analog Load Cell Signal Sensitivity:
- 0.1 V/graduation minimum, 1.0 V/grad recommended
- A/D sample rate:
- 80 Hz
- Communication:
- RS-485 or RS-232 simplex supports up to 115,200 bps
- Operating Temperature Range:
- -4°F to 140°F / -20°C to 60°C
- Power:
- 12-24 VDC, 5 watts
- Dimensions:
- 4.84 x 3.62 x 1.96 in
- Weight:
- 1 lb
- Brand:
- Rice Lake
- Model:
- SCT-10