The Rice Lake 882IS digital weight indicator is for use in hazardous environments where it is necessary to use intrinsically safe equipment. It features a NEMA 4X/IP66 rated stainless steel housing and can power up to (4) 350 ohm load cells or (8) 700 ohm load cells. Use with FM-approved load cells or scale bases for IS approval per official FM control drawings.
The 882IS is NTEP approved and can be used in legal for trade scale systems.
Features
- FM Approvals, NTEP certified, UL/cUL Listed
- Up to 10,000 displayed resolution
- Supports up to (4) 350 ohm load cells or (8) 700 ohm load cells
- Seven-digit, seven-segment LCD display 121 x 24 dot matrix messaging area with white LED backlight
- NEMA Type 4X/IP66 rated stainless steel housing
- Display units in lb, kg, oz, or g
- Gross, net, center of zero, motion, and units annunciators
- Tilt stand included
- I/O module option: one serial port, optional analog outputs, optional fieldbus cards
- Duplex fiber optic interface
- Front panel digital calibration
- Automatic zero and span temperature compensation
Intrinsic Safety
FM/cFM
- Class I,II,III, Division 1
- Groups ABCDEFG T4Class I
- Zone 0 AEx/Ex ia IIC T4 Ga
- Zone 20 AEx/Ex ia IIIC T135°C Da Ta = -10°C to +40°C (14°F to 104°F)
ATEX/IECEx
- II 1 G Ex ia IIC T4 Ga
- II 1 D Ex ia IIIC T135°C Da
Additional Options
- IS6V2 Battery option
- IS6V2 Battery 100-240VAC NEMA 5-15 (North American plug)
- Power supply, 882IS mb-EPS-100-240-X2, dual output 6.8 VDC 200mA
- Power supply, 882IS mb-EPS-100-240-X2, dual output 6.8 VDC 200mA, 1/2 in NPT-M20
- Safe Area Module, 882 smart I/O interface
- I/O Interface Option Card: Single analog output (0-10VDC, 0-20mA, 4-20mA)
- I/O Interface Option Card: Ethernet/IP
- I/O Interface Option Card: DeviceNet
- I/O Interface Option Card: ProfiNet
- I/O Interface Option Card: Profibus
- I/O Interface Option Card: Modbus TCP
- I/O Interface Option Card: EtherCAT
Downloads
882IS Intrisically Safe Indicator Datasheet 882IS Technical Manual
882IS IS6V2 Battery Instructions 882IS 6V Battery Charger Instructions
882IS mb-EPS-100-240-X2 Power Supply Instructions 882IS Condition of Use
882IS IO Module Installation Manual 882IS Interface Option Cards Installation Manual
- Maximum Displayed Resolution:
- 1:100,000
- Maximum Resolution (NTEP):
- 1:10,000
- Weighing Units:
- lb, kg, oz, g
- Display:
- Seven-digit, seven-segment LCD display
- Keypad Controls:
- Zero, Gross/Net, Tare, Print, Units Conv, Start, Stop
- FM Approvals:
- Class I, II, III; Divisions 1, 2; Groups A, B, C, D, E, F, G, T4
- IP Rating:
- IP66
- NEMA Type:
- 4X
- Load Cell Excitation:
- 3.0 VDC at 87.5 ohm, 4.6 VDC at 700 ohm
- Load Cell Current:
- 34mA
- Load Cell Drive:
- Up to 4 x 350 ohm and 8 x 700 ohm
- Analog Load Cell Input Range:
- 0.6mV/V - 4.0mV/V
- Analog Load Cell Signal Sensitivity:
- 0.2 V/graduation minimum, 1.5 V/grad recommended
- Conversion Rate:
- 60 updates/second
- Operating Temperature Range:
- 14°F to 104°F / -10°C to 40°C
- Weight:
- 6.1 lb
- Brand:
- Rice Lake
- Model:
- 882IS