The Z36 HK is the result of many years of experience in the design of universal centrifuges, high speed centrifuges and compact microcentrifuges. The result is a “Super-Speed” centrifuge with unmatched performance among benchtop centrifuges. A robust motor drive powers a variety of high speed angled rotors to speeds that would generally only be achievable in large, floor-standing ultra centirfuges. 2.0ml microtube samples can reach forces above 65,000xg, while 50ml samples, as high as 41,410xg.
In addition to its high speed capabilities, the Z36 HK doubles as a universal centrifuge with a 4 x 250ml swing out rotor (offering inserts for all common tube sizes) as well as a 2 x 3 position swing-out microplate rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
**Rotor not included: Choose from rotor options below in "Related Products" section
Features
• Simple one handed operation
• Easy to program with gloves on
• Splash proof digital display
• Permanent indication of Preset and Actual Values
• Selection of speed in both rpm and g-force, with increments of 10
• 10 acceleration and 10 deceleration rates with storage of up to 99 runs
• Preselection of the temperature from - 20°C to 40°C with 1°C increments
• Temperature selection available in both °C or °F
• Pre-cooling program option
• Standstill cooling
• Pre-selection of running time from 10 s to 99 h 59 min or continous
• Storage of up to 99 runs incl. rotor type
• Quick-key for short runs
• Diagnostic program
• Timer: the centrifuge starts at the preselected time
- Max Capacity:
- 6 x 250 ml
- Speed Range:
- 200 to 30,000 rpm
- Max RCF:
- 65,395 x g
- Refrigerated:
- Yes
- Temp Range:
- -20°C to 40°C
- Timer:
- up to 99 hr, 59min and continuous
- Power:
- 120V/230V, 60HZ, 1800W
- Dimensions:
- 28.1 x 20 x 16.5 in.
- Weight:
- 200 lbs
- Control:
- Microprocessor with large LCD display
- Motor:
- Maintenance-free induction drive
- Lid Lock:
- Motor driven
- Rotor Identification:
- Automatic radio-frequency rotor identifi cation system (RFID) with over speed protection, immediately upon rotor insertion
- Noise Level:
- under 65 dBA at max speed
- Chamber Construction:
- Stainless steel
- Imbalance Detection:
- Yes, with automatic cut-off
- Memory:
- up to 99 runs incl. rotor type
- Sample Temperature Indicator:
- Yes
- Acceleration/Deceleration:
- 10 acceleration and 10 deceleration rates
- Indicator:
- Audible signal at the end of each run with several melody options
- Manufacturer:
- Hermle
- Model:
- Z36 HK
- Item No.:
- Z036-HK
- Product Type:
- Centrifuge
